433 NIM to CAMAC Adapter



The Model 433 provides an easy and convenient method of utilizing NIM standard modules in the CAMAC standard environment. This alternative frequently saves both the expense and space required of an additional NIMBIN and power supply.

To install the Model 433, simply determine which voltages are available from the CAMAC crate. All standard CAMAC supplies provide ±6Volts and ±24Volts. However, many crates also furnish ±12Volts. The Model 433 contains two on-board regulators and jumpers which select either the ±12Volts from the CAMAC supply, or regulated down from the ±24Volt supplies. Select the proper jumper positions, and insert the 433 adapter into any of the standard CAMAC slots, (position 1 to 23).

Download actual Specifications in . PDF format for this model number or go to our Download area where all the data sheets are available and are listed by model number .

Back to the Product Selection Page or the Phillips Scientific Home Page